Skip to content

Prusa I3 MK3S+ 3D Printer Assembled Kit

$2,899.00

BASIC INFORMATION

  • Build volume: 25×21×21 cm (9.84″×8.3″×8.3″)
  • Layer height: 0.05 – 0.35 mm
  • Nozzle: 0.4mm default, wide range of other diameters/nozzles supported
  • Filament diameter: 1.75 mm
  • Supported materials: Wide range of thermoplastics, including PLA, PETG, ASA, ABS, PC (Polycarbonate), CPE, PVA/BVOH, HIPS, PP (Polypropylene), Flex, nGen, Nylon, Carbon filled, Woodfill and other filled materials.
  • Max travel speed: 200+ mm/s
  • Max nozzle temperature: 300 °C / 572 °F
  • Max heatbed temperature: 120 °C / 248 °F
  • Extruder: Direct Drive, Bondtech gears, E3D V6 hotend
  • Print surface: Removable magnetic steel sheets with different surface finishes, heatbed with cold corners compensation
  • Safety features: IR filament sensor, high-quality Delta PSU with Power Panic, 3 thermistors, RPM monitoring
  • LCD Screen: Monochromatic LCD

Out of stock

SKU: PRI-MK3S-COM-ORG Categories: , Tag:

The Original Prusa i3 MK3S+ is the latest version of Prusa’s award-winning 3D printers. The upgraded MK3S has a brand new SuperPINDA probe for improved first layer calibration, added high-quality, Misumi bearings and various useful design tweaks to make the printer easier to assemble and maintain. The MK3S+ includes all the proven features of the previous models, including the heatbed with removable PEI spring steel print sheets, automatic Mesh Bed Leveling, filament sensor, power loss recovery (power panic) and safety features. While still staying as silent as ever!

This version is an assembled 3D printer. Fully assembled and factory tested, so all you need to do is to unpack it and plug it in.

Thanks to all of these (and many other) features, the MK3S is voted the best “Best 3D Printer” by ALL3DP. The MK3S is also the highest-rated 3D printer, and the “Editor’s Choice”, in the prestigious MAKE:MAGAZINE’s Digital Fabrication Guide 2019. The MK3S is also featured in TechRadar’s Best 3D printers of 2021 as The best all-around 3D printer. NY Times wrote that “…of the 11 printers we’ve tested over the past five years, the Prusa i3 MK3S printer has produced the largest and best-looking prints.”

The functionality of the MK3S+ can be further enhanced by our unique Multi-Material Upgrade 2S for printing with up to 5 filaments simultaneously.

BASIC INFORMATION

  • Build volume: 25×21×21 cm (9.84″×8.3″×8.3″)
  • Layer height: 0.05 – 0.35 mm
  • Nozzle: 0.4mm default, wide range of other diameters/nozzles supported
  • Filament diameter: 1.75 mm
  • Supported materials: Wide range of thermoplastics, including PLA, PETG, ASA, ABS, PC (Polycarbonate), CPE, PVA/BVOH, HIPS, PP (Polypropylene), Flex, nGen, Nylon, Carbon filled, Woodfill and other filled materials.
  • Max travel speed: 200+ mm/s
  • Max nozzle temperature: 300 °C / 572 °F
  • Max heatbed temperature: 120 °C / 248 °F
  • Extruder: Direct Drive, Bondtech gears, E3D V6 hotend
  • Print surface: Removable magnetic double-sided textured powder-coated spring steel
  • Safety features: IR filament sensor, high-quality Delta PSU with Power Panic, 3 thermistors, RPM monitoring
  • LCD Screen: Monochromatic LCD

ADVANCED FEATURES

  • Controller: EINSY RAMBo 8-bit board  with Trinamic 2130 drivers (256 microstepping), co-developed with Ultimachine, sensorless homing for X and Y axes
  • Mesh Bed Leveling: Advanced high-quality SuperPINDA sensor (Super Prusa INDuction Autoleveling sensor)
  • Print sheet profiles: Firmware supports print sheet profiles to store Live Z calibration data to enable quick switching between different print sheets.
  • Filament sensor: IR sensor built-in, supports filament auto-loading. Print pauses when filament runs out.
  • Power Panic: Hardware-based, single G-code line accuracy
  • Ethernet connection: via Raspberry Pi (optional)
  • Wi-Fi connection: via Raspberry Pi (optional)
  • Advanced sensors: 3 thermistors, fans RPM monitoring, SuperPINDA
  • Calibration: Automatic, Mesh Bed Leveling, SelfTest
  • Print medium: SD card (16 GB card included)
  • Firmware update: via PC (USB cable)
  • PSU: Custom-made Delta PSU with hardware-based power panic
  • Advanced features: Automatic filament loading, steel sheet profiles, Octoprint compatibility and more
  • New features introduced through firmware upgrades

Reviews

There are no reviews yet.

Be the first to review “Prusa I3 MK3S+ 3D Printer Assembled Kit”

Your email address will not be published. Required fields are marked *