Kiwi3D water washable resin makes clean up so much easier! No more IPA needed, clean up can be done with water. Please dispose of waste water according to your local regulations. Suitable for most LCD/DLP UV-curable 3D printers with the wavelength 405nm. Making it completely compatible with ANYCUBIC, ELEGOO, EPAX and Phrozen Shuffle XL, Wanhao D8 & more.
Fast curing speed, high accuracy, low shrinkage, a combination of stiffness and toughness & low odor make it a great choice for electronic products, cosplay props, D&D miniatures, custom DIY designs, education and other fields. Available in 6 vibrant colours.
Resin parameters
Solidify Wavelength: 405nm
Viscosity 200-400 cps
Density: 1.08 g/cm3
Parameters of Cured Product
Critical Exposure: 6-13mJ/cm3
Hardness(D): 76D
Curing Depth: 0.015-0.5mm
Elongation at break: <10%
Tensile Strength: 60-80MPa
Bending Strength: >60MPa
Linear Shrinkage Rate: <1.5%
High Impact Strength: >10kj/m2
Thermal Deformation: 80-90°c
Bending Modulus: >1000MPa
Reviews
There are no reviews yet.